-

What cfg is better for fragmovie?

the top one, but both are mediocre. you want vibrancy and clarity of picture, not dull colors with too much blur. :>

How do you know what he wants?

considering he's asking esr, i doubt he knows what he wants

But if he doesn't know then how the hell anybody else does?

ill fight you

shit's giving me a headache

i actually like the blurring in #2, it feels much smoother to watch than #1

#1 especially is too dark, you could increase the r_intensity or gamma a bit on both of them

and i don't like the white/black wolfcam rockets, they're too difficult to see. i like the clear red/red trail you see in a lot of videos

both horrible

seriously the blur is destroying my eyes

What kind of movies do you like and config them? Can you give examples?

this (but this is a little bit too blurry by a bit)
https://www.youtube.com/watch?v=KE7iJ6xFcG0

https://www.youtube.com/watch?v=_P6RZfSnu7E
the 2nd one works best if the shooting is really really good(otherwise the first)

Movie making should not be taken too seriously...

Unless it gets you a real job/career.

or you want to be unbanned.

Or you really enjoy it and you want to make something you're satisfied with.

i still can't figure out if all your configs have too much blur, or every time i see your name I KNOW there will be blur

Please show movies with little blur

http://www.youtube.com/watch?v=Y86n2VIwaqY

[img1]

Attached Image: 99940-416_5.jpg (164KB)

rofl

1.

D O O M
O
O
M

3rd

1.

Fix for 1st config is ready, This changes the situation in favor of one?

fix 2 for config 1st is ready

http://www.youtube.com/watch?v=0dvD5a_ybaY new test minimum blur, but not smooth

lower the saturation pls

fixed 3 is ready, maybe this blur easy for look

fix4 - http://www.youtube.com/watch?v=gX9cAZAdhw8 bad blur or look easy?

looks like shit.

|:<(

IMO I see 3 problems :
- Too much motion blur which is obvious during the quick cameraa turns
- Overall lighting is very low on a few map such as aerowalk.
- Grenade's flare

The point of a movie is obviously not to show the environment but you have to still show it properly to allow the viewer to project himself as the player. This could be fixed by using specific settings for each maps. Point 1 & 2 does not help this at all.

Point 3 is more based around the confusion that it can cause. Basically, the flare appear way off the center point of the grenade, I am pretty sure most viewer who haven't played Q3 will thinks the shiny flare is the actual point of contact.

fixed 5 720p - http://www.youtube.com/watch?v=gzwA-4bDqqY

These maps look better than hub, but i cant tell anymore if your cfg is getting better or it's the maps ops6 is best of these

hub is middle-easy for keep quality on YT, 1st palce from hard is bloodrun and intervention

variant 6 http://www.youtube.com/watch?v=98mEV5MI-cM&feature=youtu.be

Variant 7 - http://www.youtube.com/watch?v=EYccBXF0ImU

This one looks pretty clean. The kind of material you would usually see in most good frag movies.

Im unsure if you planned on doing any major editing such as replays with different perspectives, focal lengths, intros etc afterward but even without that, it currently looks pretty decent as it is.

The only issues I have noticed was frames not being rendered properly (visible vertical cuts) and maybe the image sharpness not always being present even if the camera was not moving that much. I guess the later one is just due to a lower bitrate (maybe because of the youtube re-encoding). As for the vertical lines... it look like what would happen when v-sync is off, but vertically instead of horizontally :/

Interesting comment about the vsync, I will try to use vsync in the wolfcam, if possible. I agree that the video is not enough sync. It's food for the next patch

fix7 ready http://www.youtube.com/watch?v=ws03_ziedOk#t=133

1) - https://www.youtube.com/watch?v=DSXNrm9ZC6A&feature=youtu.be
2) - https://www.youtube.com/watch?v=gzwA-4bDqqY

1 or 2?

to much blur just like the configs you posted before - do you even change that at all?
dat intense blur + high fov gives me headache while watching it. cannot watch it longer than 30 seconds (im not saying this to troll. i literally cannot watch it because of eyestrain or whatever)

yes too much blur and for me it looks a bit dark. dont like the music much either it is too dramatic bit like an episode of lost or through the wormhole (narrated by morgan freeman)

So fuzzy. I like the rockets from #40 though.

I used a other type of blur in 1st test so that should look better than in the second test. I thought that &#1084;aybe blur is watchable in 1st test. But now it's your`s reactions shows that the new type of blur is also bad.in 1st test too. I will look for new ways to blur. Look was easy and smooth and good quality

j2

again too blurry, too dark, tryhardy font, tryhardy music

in next test I tray this settings of blur http://www.youtube.com/watch?v=nIdU02IWlUE this blur is good?

it's good but a little bit too blurry. still works since it's very bright

my first movie and cfg - http://www.youtube.com/watch?v=fKchPNnFBEk 07 december 2012

new test - http://www.youtube.com/watch?v=qdQysXpSsnc

its ok, u can upload it now

http://www.youtube.com/watch?v=I14SD-tKlyw&feature=youtu.be better blur imo, maybe wrong

https://www.youtube.com/watch?v=gpuh1WE-RVw better blur imo

hahahaha

new test - http://www.youtube.com/watch?v=vZ_n8GEkVG0

new test - http://www.youtube.com/watch?v=nDNAH8LbcfI

They're all shit

Ehehehe ))) Why?

because you make this shit every day and you never stopped trying.

ya lousy freak...

please do not be angry!

xD

By the way don't stop trying making frag movies, even if they bully you or talk shit :3

Old cfg - http://www.youtube.com/watch?v=2hoTNRiw_Zg

Everything is good, but as I'm making a frag movie right now, I notice that it's better if you render in 1080p at least, and maybe reduce a little bit the FOV, just for the movie purpose. Not a lot just a little, what FOV is that?

edit: Actually you don't HAVE to lower the FOV, BUT make sure that the final rendered file will look as sharpest as possible otherwise the targets might look blurry when a bit far.

Ok 1080 is normal for youtube, 720 is shit. Maybe vp9 codec update for youtube in 2014-2015 remedy the situation, but until now the only mode 1080. fov is 110, maybe 105 is better im try this later

Ok, if FOV 105 is too different from the feeling you want, stay with FOV 110, but then make it 1080p.

better config is 4th of 4?

1) - http://www.youtube.com/watch?v=nDNAH8LbcfI (NEW)
2) - http://www.youtube.com/watch?v=gzwA-4bDqqY#t=78 (OLD)
3) - http://www.youtube.com/watch?v=IeX_IqFyAIM (NEW 2)
4) - http://www.youtube.com/watch?v=2hoTNRiw_Zg (very old but i keep this)

new test - http://www.youtube.com/watch?v=qFjXeTdQZ2w&feature=youtu.be

new test - https://www.youtube.com/watch?v=9JsuadFvlHE

new test http://www.youtube.com/watch?v=tp-hhsnnYl4

every single one of those has WAY to much blur.
the recent "new test" one is also way worse than most of the ones before.

id take the 12.may "new test" version, reduce fov by 5, increase gamma, remove blur (whoever started using that, die in a fire) and you may have a good one.

also may i ask at what bitrate you encode and upload.. because the sharpness droppes drastically whenever theres any movement and even the 1080p version starts to look like 480p (might just be another sideeffect from blur madness tho)

30 fps without blurring have strobbes and worst quality on YT(youtube), but hight picmip losing less quality on YT than the original. Blur is help to keep quality on YT for picmip=0.

I do not know how to quality calibrate the blur, so my blur is bad. Here is the correct calibration blur - https://www.youtube.com/watch?feature=player_...XFMhg#t=49 But not so simple - 30fpsx20blurframes is not good for my demos . How he achieved this smooth and synchron movement? What is the trick?: This smooth like freecaming! Pov camera edit? I second year trying to achieve such results but all in vain!

don't use youtube.

i know what you mean, but using blur is really not the answer to that problem. blur is horrible because it mimics something the brain does itself, without accomplishing the same result. it constantly makes you focus the middle of the screen - on a completly sharp picture your eyes can decide freely where to look and its both less stressful and annoying.

if you have problems with YT compression dont fix that with Blur, you are basically trading one problem for another one. there ARE ways to accomplish that.. i just browsed for "quake live" in youtube and took the first hit: https://www.youtube.com/watch?v=ygsjO0t6v0U
"only" 720p, no blur used - still very good quality and it has also less contrast than your config (your shadows are way to dark). and if your pause at a random scene you will see that even the edges are not blured out and everything on screen has the same level of quality - its very pleasent to watch and as a viewer you dont get annoying eyestrain.

the key to that is recording and encode quality, not so much the config itself. if you use adobe premiere for example dont just use the build in encoding (which doesnt have good quality). i got the best result by using debugmode frameserver as a tunnel to mediacoder (both are free & easy programs, its pretty easy to setup mediacoder for max YT quality encoding). and in the end do a file that has no less than 8000kbit/s (dont hesitate to go above 10k here).
if you upload really high quality on youtube, even after their compression something decent will happen.

Thank you,but the best solution for upload on youtube - do not compress and upload 40GB for 5min 720p,60gb for 1080p uncompressed , to avoid intermediate compressed , modern Internet is not the Problem, I uploaded on youtube 40GB per night.

In your opinion what is better? 1) https://www.youtube.com/watch?feature=player_...XFMhg#t=49 or 2)https://www.youtube.com/watch?v=ygsjO0t6v0U

Definitely all times number 2. Imo you get the smoothest video by just adding a tiny bit of blurframes. Let's say for 60 fps you don't really need any blur at all for video to look smooth, but for example 30 fps it could be nice with adding 3-4 blurframes just to fool the eye there are more frames but still not enough to totally mess up the image.

number 2, hands down

and again thats due to blur.. i watch 1) for like a minute maximum and than close it. im not trolling you here or something but atleast for me the use of blur drastically deminishes the quality of any movie. im literally unable to look at it for any longer without getting annoyed

New cfg test http://www.youtube.com/watch?v=tPLmqXWaREE

New cfg test https://www.youtube.com/watch?v=H60ihIJCsbw

New cfg test http://www.youtube.com/watch?v=qU9xUt-sZJk

New cfg test http://www.youtube.com/watch?v=pKMuBSAPSLY shit and good demos comprare
How to imrove lagged demos up to same 1st demo?

CPMA epic gameplay (cpma demos cfg test) )http://www.youtube.com/watch?v=GW2dhQubFfk

CFG&FRAGS test test (middle quality ql demos) - http://www.youtube.com/watch?v=drd62VE9l0s

this cfg on high ping cpma demos (low quality demos) http://www.youtube.com/watch?v=55oLqa5-TIg

Other cfg for low ping cpma demos (high quality demos) http://www.youtube.com/watch?v=GW2dhQubFfk

new stuff test (second hand frags) - http://youtu.be/BEYZXk99QWo

Silky smooth. It looks like 60fps. Screw the blur haters.

what are your vegas render settings if you dont mind?

60 fps+blurframes with resample to 30fps , but smooth depent at quality of demos, ql-demos have more lags than cpma demos so smooth 30fps like 60fps attempt is hard or impossible for more ql demos

Hmm why resample? I've always heard that it makes things look blurry and ugly so ive disabled it

In some cases, allows resample is achieved at 30fps smooth , such as CS movies 300fps or more resample to 30fps https://www.youtube.com/watch?v=BqL8vCvb8cQ

http://www.youtube.com/watch?v=GW2dhQubFfk In this i use only 30fps without resample and wolfcam blur because this demos is high quality, other demos with lower quality need resample imo for smooth 30fps video

http://www.youtube.com/watch?v=5_WrUP2cF70 mme_blurframes 200 test

HUK demos cfg - http://www.youtube.com/watch?v=O8mgkZwUlgg cfg for my demos

HUK demos cfg ver.2 http://www.youtube.com/watch?v=bTforGYEqpQ cfg for my demos

nice, but music still crap :D

huk demos cfg test 2 - http://www.youtube.com/watch?v=a7ks6I7EHeg

new test https://www.youtube.com/watch?v=jsl6Z8FUiFQ

too dark, too desaturated, and your motion blur doesn't have enough samples so it looks like ghosting instead of motion blur. there are visible gaps between the "blended" frames.

NEW TEST http://www.youtube.com/watch?v=neZ4CBhsp1w

Requem for " Jarafara movie " config - http://www.youtube.com/watch?v=dD73nfQ5G-8&am...DJg0RqGDEg my old config from june 2013

You gotta work on those transitions, man... You worry so much about configs and it really doesn't matter that much.

Anyway, I hope that "Requiem" means your obsession with configs is fading away. RIP config. ;)

Edit: To illustrate my point that the config doesn't matter all that much, watch this (I'm sure you have probably already seen it, but watch it again, it's worth it. ;).

I dug up my old config, in the collection of configs, and decided to check how the config works on other demos. Each configuration of my collection = wolfcamql config + sony vegas color correction preset + encoder settings + q3 demosmoother settings. demosmoother use only for this and some old configs. In new configs i`m not use q3 demosmoother

I guess you have the technical part of the thing covered, now you just need another idea for a project. Something with meaning, not "just another frag compilation (c) Zoot" thing. Freq was great, you have to build on that and push it further.

vertexlights - looks unusual maybe I'll do a similar configuration

...maybe I'll do a similar configuration

:)

http://www.youtube.com/watch?v=FFw8cBgF9H0 - new test

Other stuff - http://www.youtube.com/watch?v=nDNAH8LbcfI&am...DJg0RqGDEg vs Jarafara movie config - http://www.youtube.com/watch?v=dD73nfQ5G-8&am...DJg0RqGDEg

I guess the "Other stuff" movie's blur isn't too bad.

Too much blur for both.

::::::-(((

That's definitely too much blur. ;)

new test for hd 720, no smooth cfg - because shitty quality demos - https://www.youtube.com/watch?v=PGKOXI66N8w

new cfg test - https://www.youtube.com/watch?v=ELJSycMtieM

New cfg test 60fps youtube - http://www.youtube.com/watch?v=uz19m0mvEFY&feature=youtu.be

Nice it works. <3 60 fps

it doesn't look smooth at all

You sure that's 60 FPS?

Use chrome browser and set hd , firefox not support 60fps

aurora and nightly do

set player as html5 in YT settings while using FF.

[-] for dubstep pls staaaahp this

ffa gameplay 60 fps - http://www.youtube.com/watch?v=scDIBUZ-wwM

can someone finally put him on Probation already

New cfg test 50fps https://www.youtube.com/watch?v=FpipayHS2gw&a...Anyua4HGEg

New cfg test 50fps - https://www.youtube.com/watch?v=J7eiAxzTqvY

too dark

NEW WOLFCAMQL CONFIGS TEST FOR FRAGMOVIE

1) http://www.youtube.com/watch?v=RR0hZEnNyCA&feature=youtu.be

2) http://www.youtube.com/watch?v=qzTMj8cUVjE

what better? 1 or 2

to dark.

The second one is better.

I dont like other enemy models than keel on fragmoviess :)

one of them has clown music

second beter?

1) http://www.youtube.com/watch?v=qzTMj8cUVjE
2) http://www.youtube.com/watch?v=Tcsn6ctsaYs

what better? 1 or 2

new test 3) http://www.youtube.com/watch?v=ti6hgHJjF90&feature=youtu.be

what better? 1,2,3

3) too dark

New test

1) http://www.youtube.com/watch?v=rII76-RkK-o good music?

2) http://www.youtube.com/watch?v=qzTMj8cUVjE

what better? 1 or 2

new test Wolfcamql movie config test - http://www.youtube.com/watch?v=LBLGBTofIb8

Too dark.

New cfg test - https://www.youtube.com/watch?v=c3H1WJFsqj0

2 dark 4 me

New cfg test - https://www.youtube.com/watch?v=2rjkqExao5M

too dark

On my 2 monitors this video does not look dark, but perhaps on other monitors this video looks dark

Too dark.

New cfg test - https://www.youtube.com/watch?v=hcrERWx6KWI lag on 1440p? Not lag 1440p on my pc but on your pc?

smooth here.
Mind to share your wolfcam cfg?

http://pastebin.com/v0v5hXgU

thanks

Sorry new link because old wrong blur settings http://pastebin.com/vCdiheuQ

It's too dark

New cfg&demos test for new quake live movie - https://www.youtube.com/watch?v=JDXGRtoTTl8

2 dark

Eheh poop) why silent?

new cfg test http://www.youtube.com/watch?v=veRE3s0IjrY

Too dark

Thank you for your opinion. I am pleased that it is you watched my videos. I try to make a video for you to lighten

hi my queen, dark or not for you? https://www.youtube.com/watch?v=dEyx8EOW42g

Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread
Ignored User Thread

lmao

new microtest - https://www.youtube.com/watch?v=NYMEEs9_bpQ

new microtest 2 - https://www.youtube.com/watch?v=NqWw9I2qudg

https://www.youtube.com/watch?v=Dr0OY36tc5o

Movement is perfect smooth, don't touch anything!

Now start playing with
- colors
- weapon
- ui
- design
- brighten a bit

etc.

Or maybe actually put together some content and finish something.

Or just tweak cfgs. I don't know.

too dark

https://www.youtube.com/watch?v=eUps2_XxyM0

https://www.youtube.com/watch?v=-Wm1HZhmVQY

https://www.youtube.com/watch?v=88EtqSPBUkc

https://www.youtube.com/watch?v=N_ZhoERCWnY

The Campgrounds II Matrix Edition \by sst13\ - https://www.youtube.com/watch?v=o9mZZT3eMXA

looks pretty neat tbh

gj. only 15 years late

WTF did I just not watch

HOLY CHIT \o/

1) https://www.youtube.com/watch?v=toDeT4MaMvw
2) https://www.youtube.com/watch?v=ILMilIoK5Ac

what better?

2) ILMilIoK5Ac

http://www.youtube.com/watch?v=zX2JwSC9wuA

https://www.youtube.com/watch?v=P0x5MrAc5l0&feature=youtu.be

1) https://www.youtube.com/watch?v=P0x5MrAc5l0&feature=youtu.be
2)https://www.youtube.com/watch?v=GYzD-xNFz1g

1 or 2?

CFG&DEMOS test for future movie - https://www.youtube.com/watch?v=9hOjxGsbMVE&feature=youtu.be

CFG&DEMOS test ver.2 for future movie (q3mme) - https://www.youtube.com/watch?v=J1ByaNzPyMc&feature=youtu.be

https://www.youtube.com/watch?v=TciRUjibPWk

Not bad

https://www.youtube.com/watch?v=4H9Ic-r68Oc&feature=youtu.be

RU COMMUNITY WOLFCAM cfg test - https://www.youtube.com/watch?v=fEmgxBO8jME&feature=youtu.be

cam test on RU COMMUNITY WOLFCAM cfg https://www.youtube.com/watch?v=K9YUYlHZ2PE

https://www.youtube.com/watch?v=VGp5z7EwBG4