no it's the sensor.

http://www.youtube.com/watch?v=xE1ulpki6cM

+ comments

I've used it for around 6 months and had some issues at first with my qck+ - turning it the right way up (logo in bottom left) seemed to help somewhat though!

Tis fine for me, not tried on clothe though.

Doesn't exhibit tracking issues on my Puretrak Talent.

As far as i remember, you also got the abyssus. So the DA3.5 tracks better?

Hows the lift-off distance?

btw: does anyone have the left-handed one and can tell me if the left and right-click can be set up without needing drivers (i need the left button to be = mouse1)?

On every razer mouse you can set every available button to what you want, so ya... it's pretty easy to change the position of the mouse1/mouse2 buttons ;).

He said without drivers, which means you can't set every available button to whatever you want.

This mouse(and in fact, all razer mouses) have memory on it(he just need to change it once, then he is ready to go for it). So, he can take the mouse where he wants and plug it without doing sh*t ;).

Memory really helps with the buttons, which it doesn't store info for. Get your facts straight!

Mine razer lachesis stores it, it's tested! So go straight YOUR facts.

Did you even read the topic? You are one or more of the following:
-illiterate
-ignorant
-slow

FYI the topic is DA 3.5g which doesn't store settings for buttons, only hz and dpi.

You can swap them in the windows control panel under mouse settings. There is a checkbox there to swap mouse1 and mouse2.

Yup the Abyssus has major tracking problems on the Talent (and no I'm not going to be turning my Talent sideways to make it work right), incurring bad jitter. Though the Abyssus on the Goliathus Speed it's not as bad. DA 3.5 liftoff is low, like 1-2mm iirc from testing with cd's. Haven't tested Abyssus liftoff.

Does the DA work well at 450 dpi? and 500 or 1000hz polling

the old one didn't have any problem ( except you got neg accel faster than at 1800 dpi but the speed was still crazy ), I've read stuff about the 3.5 jittering all over the place at 450dpi though.

Works fine at all dpi's and polling for me.

Anyone try the 3.5g on goliathus control (especially 900dpi)?

Thanks for all the replies, just ordered a DA3.5.
:)

Good choice!

im using DA3.5g on mionix 260 cloth pad and no problems whatsoever

Got the DA3.5.
Jitters on my Everglide Titan. :/

Yeah, get the latest firmware update for it on the Razer site. That sorted out the problem I had. Now my DA3.5 is a dream to play with :)

Yes, please test on latest firmware v2.41...

===

Also just tested on the CM Storm CS-X Battle Pad (amazingly smooth large cloth pad they were showing off @ Quakecon) and absolutely no jitter.

I had the 45° angle problem on the Everglide Titan that has been reported in the Abyssus Mousepad thread. And i just noticed it while browsing, no trying to make it jitter in paint or anything. Most of the time it worked just fine, but buying a mouse for 50€ and then having it randomly starting to jitter? nah

Shape sucked for me anyways. :o

I also updated to 2.41 as soon as i got the mouse.

I'd like to add that I'm currently trying a friends Razer Salmosa (3G Sensor). And it also jitters.. so maybe my moiusepad is used up. :S

yes, 3g sensor also jitters, but way less overall and in much smaller angle variety

update firmware !

How are the mouse feet on the 3.5G compared to the 1800DPI version?

I'm thinking about getting one but the feet on the older DeathAdder were horrible and constantly scraped. I don't like to deal with buying third party mouse feet and putting them on.

Somes Pro players (like Stermy) use Hyperglide, why not using that Anonymous ? :

http://www.hyperglide.net/photos/da-pk-400.jpg

Just here to say that RAZER PRODUCTS ARE TOYS.

I've tried most of their mice , including deathadder which worked for 1 minute and then DIED. Even tried flashing the firmware with different mobo ... but then i noticed there are thousands of forum posts with same symptoms and all of em said its dead. (apparently the memory corrupted because i changed the dpi and pollingrate.)

All razer products which I've tried had problems beyond imagination. Installing seems really random and hard, also the sensors in most of em totally suck etc.

Wow, you seem the perfect beta tester, for Razer company.

:-)

Usually all work fine ... without problem.

I had bought the first mouse produced by razer, I think it was the smaller razer boomslang(I think the 1000), the mousewheel squeeked and it was by far the most expensive mouse out there at the time (only the boomslang 2000 was even more expensive, but I think the exterieur is the same), that mouse felt so cheap ... I also do frequently hear that razer mice die ...
tbh. I have had many logitech mice, like 5 or 6 models, not a single one died or disappointed me, that's real quality!!! And the logitec mice cost at maximum half as much as razer mice ...
so far I can absolutely recommed the mx300 and the mx518

Ya tell me where I can buy Logitech Mx300/ 310/ G1/ G3/ in UK.
Coz I want small mice with 80gram weight!!!!!!!!!
Not over 140 gram G9x G500 or G700!

Can anyone confirm that the firmware fixed the mouse to work perfectly for the QcK mousepad?

http://www.futureshop.ca/en-CA/product/steels...546049en02

Would really appreciate it... once confirmed I plan on buying both the DA and the mouse pad. It's the only gaming cloth pad that I can get in my area. :/

stray did you upgrade the firmware and try it again? How did it go?

Tested on this surface-
http://www.cmstorm.com/en/products/surfaces/cs_x_battle_pad_dp/

Results are good. Solid tracking and no jitter...
http://a.imageshack.us/img827/9126/da35.png

I play on DA 3500DPI on a pretty worn Qck+ pad -- no problems detected. The firmware is 2.33 -- too lazy to "fix it if it ain't broken".

I just got this pad too, no jitter on abyssus either